| |
1) Due to special design of the chain, there is absolutely
no dragging or scraping action as the material simply flows in a solid
column "En-masse".
2) Selection of chain is based on the design & standards developed
by us after vast experience in this field for last 25 years.
3) Movement of material in horizontal, vertical or inclined directions
with a possible combination of these for a single conveying application
is possible thus avoiding transfer points.
4) Due to enclosed conveyor design, spillage & dust nuisance are completely
avoided. Depending upon the application the conveyor can be made pressure
tight if required & you can term your conveyor as eco-friendly conveyors.
5) As the material flows in a placid column without any internal movement
between particles, chances of degradation of material are minimized.
6) Due to specialized nature of design & construction, the conveyor
needs much less space for installation & results in saving cost of
support.
7) A single conveyor can cater to the requirement of multiple feed &
discharge points.
8) Self Feeding.
9) Conveyors of greater length can be provided with gravity type take up
arrangement.
|
